Mesh AtlasARCHITECTURAL MATERIALSStart a project

Application planning / Mesh Atlas

Metal mesh interior partitions

Metal mesh interior partitions can define a zone while allowing partial views through it. The first decision is how the divider behaves: a fixed framed panel, a tensioned screen or a moving curtain. Establish that requirement before comparing textures, because flexibility, edge conditions and support needs differ between mesh constructions. Review a hanging or framed sample at seated and standing eye levels, with light on both sides. Identify where the brief needs visual screening, a solid barrier or an acoustic separation; an open decorative surface alone does not establish all three.

01

Match construction to the intended movement

Woven wire or expanded metal may be developed as framed infill when the geometry and support design suit the project. Coil drapery uses interlinked helical wires; ring mesh uses individual linked rings. Both require attention to hanging direction, gathering and edge behaviour when proposed as curtains. A chain label can also describe other structures, so confirm the linking arrangement with a sample rather than selecting by family name alone.

02

Test sightlines under real lighting

Privacy changes with viewing angle, distance and the brightness on either side of a screen. A nominal open-area percentage cannot describe every sightline. Review a sample against representative backgrounds, including evening lighting and the intended folds. If speech privacy or sound absorption is required, have the project team define measurable criteria and the complete assembly to be assessed; decorative metal mesh alone is not an acoustic rating.

03

Resolve frames, tracks and contact points

For fixed panels, identify overall module dimensions, mesh infill dimensions, perimeter framing and attachment to the building. For moving curtains, give coverage width, finished drop, fullness, travel direction and stacking allowance. Check floor clearance, door swings, accessible routes and touchable edges. Confirm the supporting substrate and allocation of fixing design. Record alloy grade, finish process and cleaning requirements, especially where people will regularly handle or pass close to the surface.

04

Use the brief to control the visible details

Include a room plan, elevations, repeated panel sizes and any curved track geometry. Define pattern direction and how adjacent panels align. For expanded metal, label short and long diamond directions; for woven wire, show warp and weft. Request a sample that includes edge finish, frame or hanger where appearance is critical. State quantities, project location, sample approval needs and target dates, with unknown dimensions clearly marked for development.

From the library

Material references

Entries below explicitly mention a related application. Suitability for your project still requires review.

Woven wire

01 / Supplier confirmation required

Bronze Woven Mesh — Reference

Reference concept · supplier confirmation required

Finish to confirmOpenness to confirm

Reference material · specifications to confirm

Questions to resolve

Before you specify

Will a mesh room divider provide privacy?

The result depends on the pattern, viewing conditions and lighting on each side. Evaluate a representative sample in the planned position rather than relying on an open-area figure.

Can an interior partition reference be used as a guardrail?

A partition reference does not establish guarding suitability. A guard needs its own structural, opening, impact and local code assessment for the complete assembly.

Continue your research

Related sourcing guides

Material selection

How to choose architectural metal mesh

Understand how weave, openness and alloy shape the right material for your project.

Design detail

Reviewing metal mesh finishes and samples

A practical approach to colour, surface variation and physical sample approval.

From study to specification

Make the brief specific.

Share the application, project location, quantity, finished dimensions, preferred alloy and finish, and proposed fixing method. Mark unresolved details as unknown and include sample requirements.

Request a project review

Explore another direction