01 / Supplier confirmation required
Champagne Coil Drapery — Reference
Reference concept · supplier confirmation required
Finish to confirmOpenness to confirm
Reference material · specifications to confirm
Application planning / Mesh Atlas
Metal mesh ceilings
A metal mesh ceiling can be a flat panel system, an open suspended layer or a shaped decorative feature. Define which arrangement is intended and what must remain visible or accessible above it. Coordinate the mesh pattern, suspension and building services on the reflected ceiling plan; a ceiling application label is not approval for overhead installation.
01
Describe modules and the direction of the mesh
For framed panels, provide the complete module size, visible mesh opening and perimeter detail. Woven wire geometry should identify wire or cable direction and restraint. Expanded metal needs short and long diamond orientation, strand width, sheet thickness and raised or flattened form. SWD and LWD must be defined on the drawing, with clear openings distinguished from repeat dimensions. Coil and ring features need their own hanging layout rather than a borrowed panel specification.
02
Coordinate lighting, services and access
A mesh layer changes how fittings and voids are seen from below. Evaluate a sample with the proposed lights, backing colour and viewing angles. Identify access panels, service zones, sprinklers, detectors and ventilation terminals with the responsible consultants. Open area by itself does not establish sprinkler compatibility, airflow performance or acoustic absorption. Any required performance must be assessed for the actual ceiling assembly and coordinated with applicable project requirements.
03
Make overhead support a defined scope
Confirm material weight for the proposed alloy, geometry and finished dimensions, then have qualified professionals design suspension, connections and retention. State the supporting substrate and who supplies frames, hangers and any secondary restraints required by the project. Consider handling during access, replacement procedures and the stability of removable panels. Flexible draped features require specific review of their shape and attachment; decorative appearance cannot demonstrate overhead safety.
04
Ask for a representative ceiling sample
Request a mock-up that includes a joint, an edge, the selected finish and a typical light source. Specify alloy grade separately from colour and ask about finish consistency, cleaning and treatment at cut-outs. An RFQ should include a reflected ceiling plan, panel schedule, access requirements, quantities and units, installation location and target dates. Distinguish mesh-only supply from complete modules and suspension, and identify any technical information that still needs confirmation.
From the library
Material references
Entries below explicitly mention a related application. Suitability for your project still requires review.
02 / Supplier confirmation required
Graphite Expanded Metal — Reference
Reference concept · supplier confirmation required
Finish to confirmOpenness to confirm
Reference material · specifications to confirm
Questions to resolve
Before you specify
Does open mesh automatically work with sprinklers?
No. Opening geometry, obstructions, installation position and the applicable fire protection design all matter. Coordinate the proposed assembly with the responsible specialist and local requirements.
Does a metal mesh ceiling absorb sound?
Do not infer acoustic performance from the metal mesh alone. Any claimed result needs evidence for the specified complete assembly, including backing, cavity and installation conditions.
Continue your research
Related sourcing guides
From study to specification
Make the brief specific.
Share the application, project location, quantity, finished dimensions, preferred alloy and finish, and proposed fixing method. Mark unresolved details as unknown and include sample requirements.
Request a project reviewExplore another direction