Mesh AtlasARCHITECTURAL MATERIALSStart a project

Material construction / Mesh Atlas

Chain and ring mesh

Chain and ring mesh are useful search terms for several different metal constructions. A linked-ring surface, a chain-link fabric and hanging strands of chain do not share one geometry or fixing method. Use these references to identify a construction before requesting samples: individual linked rings form a connected surface, while separate hanging chains may have no lateral connection.

01

Identify how the links connect

For ring mesh, ask for ring outside or inside diameter, wire diameter, ring closure and the linking pattern. Record whether rings are welded, otherwise closed or open, without assuming one method from the image. A chain-link fabric uses a different interlaced wire arrangement; separate hanging chains may have no lateral links at all. Coil drapery, formed from continuous helices, is another distinct structure and should be named separately.

02

Consider the hanging shape and edge behaviour

Flexible linked material changes shape under its own weight and restraint. Ask which direction is intended to hang vertically and how the top, sides and lower edge are finished. Provide finished drop, coverage width and desired gathering, and distinguish these from flat material dimensions. Where movement is intended, define track travel, stack-back space for the parked curtain and clearances. A representative hanging sample is more useful than a small flat swatch for judging the final appearance.

03

Describe openness and finish without assumptions

Ring diameter alone cannot describe open area: wire thickness, linking density and the installed shape also matter. Confirm the measurement method and view a sample under project lighting. Specify substrate alloy and grade separately from bronze, gold or silver colour descriptions. Ask how closures, cut edges and attachment points are finished, how the surface should be cleaned and what supporting information is available for the proposed environment.

04

Define the installation and quotation boundary

A decorative chain reference does not establish security, guarding, impact resistance or overhead suitability. Have the project team set relevant requirements and review the complete support design. In an RFQ, identify link construction, material dimensions, panel or curtain quantities, support locations, finish reference and project country. State whether the scope includes tracks, framing, edge fittings or only mesh. Request sample review before accepting changes to link geometry or closure.

From the library

Material references

Entries grouped by construction. A reference establishes design direction; final specifications and availability require confirmation.

Questions to resolve

Before you specify

Does the chain category mean every entry is ring mesh?

No. This library groups chain-related references together. Read each entry and confirm a close-up, link dimensions and construction drawing before specifying individual ring mesh.

Can ring diameter be used as the opening size?

Not on its own. The clear opening depends on wire diameter, overlapping rings, linking pattern and hanging orientation. Request a dimensioned sample or drawing of the proposed construction.

Continue your research

Related sourcing guides

Material selection

How to choose architectural metal mesh

Understand how weave, openness and alloy shape the right material for your project.

Design detail

Reviewing metal mesh finishes and samples

A practical approach to colour, surface variation and physical sample approval.

From study to specification

Make the brief specific.

Share the application, project location, quantity, finished dimensions, preferred alloy and finish, and proposed fixing method. Mark unresolved details as unknown and include sample requirements.

Request a project review

Explore another direction